import MultiCapacitor

multicapacitor = new MultiCapacitor<count=4>
for c in multicapacitor.capacitors:
    c.capacitance = 100nF +/- 10%
    c.package = "0402"

electrical1 ~ multicapacitor.unnamed[0]
electrical2 ~ multicapacitor.unnamed[1]

​
Init Args

​
count
int

​
Parameters

​
capacitance
farad
​
max_voltage
volt
​
temperature_coefficient
dimensionless

​
Interfaces

​
unnamed[0]
Electrical
​
unnamed[1]
Electrical

​
Global Attributes

These attributes are available to all modules and interfaces in a design.
​
lcsc_id
str
Assign the LCSC ID of the module.If set, this will tell the picker to select that part from LCSC for this block.
​
manufacturer
str
This module’s manufacturer name, as a string.Only exact matches on the manufacturer’s name will be found by the picker. It’s recommended to fill this information based on what ato create component provides.
​
mpn
str
This module’s manufacturer part number, as a string.For the picker to select the correct part from the manufacturer, this must be set.
​
package
str
The package of the module.This drives which components can be selected, and what footprint is used.Must exactly match a known package name.
​
exclude_from_bom
bool
​
override_net_name
str
When set on an interface, this will override the net name of the interface.This is useful for renaming nets which are automatically generated.
​
required
bool
Only for ModuleInterfaces. If set to True, require that interface is connected to something outside of the module it’s defined in.
import MultiCapacitor

multicapacitor = new MultiCapacitor<count=4>
for c in multicapacitor.capacitors:
    c.capacitance = 100nF +/- 10%
    c.package = "0402"

electrical1 ~ multicapacitor.unnamed[0]
electrical2 ~ multicapacitor.unnamed[1]