import OpAmp, Resistor, ElectricPower, Electrical

opamp = new OpAmp
opamp.bandwidth = 1MHz +/- 10%
opamp.gain_bandwidth_product = 10MHz +/- 20%
opamp.input_offset_voltage = 1mV +/- 50%
opamp.slew_rate = 1V/us +/- 20%
opamp.package = "SOIC-8"

# Power supply connections (dual supply)
power_pos = new ElectricPower
power_neg = new ElectricPower
assert power_pos.voltage within 5V +/- 5%
assert power_neg.voltage within -5V +/- 5%
opamp.power.hv ~ power_pos.hv
opamp.power.lv ~ power_neg.lv

# Non-inverting amplifier configuration
feedback_resistor = new Resistor
gain_resistor = new Resistor
feedback_resistor.resistance = 10kohm +/- 1%
gain_resistor.resistance = 1kohm +/- 1%

# Connections for gain = 1 + (Rf/Rg) = 11
input_signal ~ opamp.non_inverting_input
opamp.inverting_input ~> gain_resistor ~> power_neg.lv
opamp.output ~> feedback_resistor ~> opamp.inverting_input
output_signal ~ opamp.output

​
Parameters

​
bandwidth
hertz
​
common_mode_rejection_ratio
decibel
​
gain_bandwidth_product
hertz
​
input_bias_current
ampere
​
input_offset_voltage
volt
​
output_current
ampere
​
slew_rate
volt / second

​
Interfaces

​
inverting_input
Electrical
​
non_inverting_input
Electrical
​
output
Electrical
​
power
ElectricPower

​
Global Attributes

These attributes are available to all modules and interfaces in a design.
​
lcsc_id
str
Assign the LCSC ID of the module.If set, this will tell the picker to select that part from LCSC for this block.
​
manufacturer
str
This module’s manufacturer name, as a string.Only exact matches on the manufacturer’s name will be found by the picker. It’s recommended to fill this information based on what ato create component provides.
​
mpn
str
This module’s manufacturer part number, as a string.For the picker to select the correct part from the manufacturer, this must be set.
​
package
str
The package of the module.This drives which components can be selected, and what footprint is used.Must exactly match a known package name.
​
exclude_from_bom
bool
​
override_net_name
str
When set on an interface, this will override the net name of the interface.This is useful for renaming nets which are automatically generated.
​
required
bool
Only for ModuleInterfaces. If set to True, require that interface is connected to something outside of the module it’s defined in.
import OpAmp, Resistor, ElectricPower, Electrical

opamp = new OpAmp
opamp.bandwidth = 1MHz +/- 10%
opamp.gain_bandwidth_product = 10MHz +/- 20%
opamp.input_offset_voltage = 1mV +/- 50%
opamp.slew_rate = 1V/us +/- 20%
opamp.package = "SOIC-8"

# Power supply connections (dual supply)
power_pos = new ElectricPower
power_neg = new ElectricPower
assert power_pos.voltage within 5V +/- 5%
assert power_neg.voltage within -5V +/- 5%
opamp.power.hv ~ power_pos.hv
opamp.power.lv ~ power_neg.lv

# Non-inverting amplifier configuration
feedback_resistor = new Resistor
gain_resistor = new Resistor
feedback_resistor.resistance = 10kohm +/- 1%
gain_resistor.resistance = 1kohm +/- 1%

# Connections for gain = 1 + (Rf/Rg) = 11
input_signal ~ opamp.non_inverting_input
opamp.inverting_input ~> gain_resistor ~> power_neg.lv
opamp.output ~> feedback_resistor ~> opamp.inverting_input
output_signal ~ opamp.output