import CAN, ElectricPower, Resistor

can_bus = new CAN
can_bus.speed = 250kbps  # Common CAN speeds: 125k, 250k, 500k, 1Mbps
can_bus.diff_pair.impedance = 120ohm +/- 5%

# Connect power reference for logic levels
power_5v = new ElectricPower
assert power_5v.voltage within 5V +/- 5%
can_bus.diff_pair.p.reference ~ power_5v
can_bus.diff_pair.n.reference ~ power_5v

# Connect to CAN transceiver
can_transceiver.can_bus ~ can_bus

# Connect to microcontroller CAN peripheral
microcontroller.can ~ can_transceiver.mcu_interface

# CAN termination resistors (120 ohm at each end of bus)
termination_resistor = new Resistor
termination_resistor.resistance = 120ohm +/- 1%
can_bus.diff_pair.p.line ~> termination_resistor ~> can_bus.diff_pair.n.line

# Common applications: automotive, industrial automation, IoT

​
Parameters

​
speed
baud

​
Interfaces

​
diff_pair
DifferentialPair

​
Global Attributes

These attributes are available to all modules and interfaces in a design.
​
lcsc_id
str
Assign the LCSC ID of the module.If set, this will tell the picker to select that part from LCSC for this block.
​
manufacturer
str
This module’s manufacturer name, as a string.Only exact matches on the manufacturer’s name will be found by the picker. It’s recommended to fill this information based on what ato create component provides.
​
mpn
str
This module’s manufacturer part number, as a string.For the picker to select the correct part from the manufacturer, this must be set.
​
package
str
The package of the module.This drives which components can be selected, and what footprint is used.Must exactly match a known package name.
​
exclude_from_bom
bool
​
override_net_name
str
When set on an interface, this will override the net name of the interface.This is useful for renaming nets which are automatically generated.
​
required
bool
Only for ModuleInterfaces. If set to True, require that interface is connected to something outside of the module it’s defined in.
import CAN, ElectricPower, Resistor

can_bus = new CAN
can_bus.speed = 250kbps  # Common CAN speeds: 125k, 250k, 500k, 1Mbps
can_bus.diff_pair.impedance = 120ohm +/- 5%

# Connect power reference for logic levels
power_5v = new ElectricPower
assert power_5v.voltage within 5V +/- 5%
can_bus.diff_pair.p.reference ~ power_5v
can_bus.diff_pair.n.reference ~ power_5v

# Connect to CAN transceiver
can_transceiver.can_bus ~ can_bus

# Connect to microcontroller CAN peripheral
microcontroller.can ~ can_transceiver.mcu_interface

# CAN termination resistors (120 ohm at each end of bus)
termination_resistor = new Resistor
termination_resistor.resistance = 120ohm +/- 1%
can_bus.diff_pair.p.line ~> termination_resistor ~> can_bus.diff_pair.n.line

# Common applications: automotive, industrial automation, IoT