import Ethernet, ElectricPower

ethernet = new Ethernet

# Connect power reference for logic levels
power_3v3 = new ElectricPower
ethernet.led_speed.reference ~ power_3v3
ethernet.led_link.reference ~ power_3v3

# Connect to PHY or connector
# Four differential pairs for 1000BASE-T
ethernet_connector.tx_pairs[0] ~ ethernet.pairs[0]
ethernet_connector.tx_pairs[1] ~ ethernet.pairs[1]
ethernet_connector.rx_pairs[2] ~ ethernet.pairs[2]
ethernet_connector.rx_pairs[3] ~ ethernet.pairs[3]

# Connect status LEDs
ethernet.led_speed ~ speed_led_output
ethernet.led_link ~ link_led_output

​
Interfaces

​
led_link
ElectricLogic
​
led_speed
ElectricLogic
​
pairs[0]
DifferentialPair
​
pairs[1]
DifferentialPair
​
pairs[2]
DifferentialPair
​
pairs[3]
DifferentialPair

​
Global Attributes

These attributes are available to all modules and interfaces in a design.
​
lcsc_id
str
Assign the LCSC ID of the module.If set, this will tell the picker to select that part from LCSC for this block.
​
manufacturer
str
This module’s manufacturer name, as a string.Only exact matches on the manufacturer’s name will be found by the picker. It’s recommended to fill this information based on what ato create component provides.
​
mpn
str
This module’s manufacturer part number, as a string.For the picker to select the correct part from the manufacturer, this must be set.
​
package
str
The package of the module.This drives which components can be selected, and what footprint is used.Must exactly match a known package name.
​
exclude_from_bom
bool
​
override_net_name
str
When set on an interface, this will override the net name of the interface.This is useful for renaming nets which are automatically generated.
​
required
bool
Only for ModuleInterfaces. If set to True, require that interface is connected to something outside of the module it’s defined in.
import Ethernet, ElectricPower

ethernet = new Ethernet

# Connect power reference for logic levels
power_3v3 = new ElectricPower
ethernet.led_speed.reference ~ power_3v3
ethernet.led_link.reference ~ power_3v3

# Connect to PHY or connector
# Four differential pairs for 1000BASE-T
ethernet_connector.tx_pairs[0] ~ ethernet.pairs[0]
ethernet_connector.tx_pairs[1] ~ ethernet.pairs[1]
ethernet_connector.rx_pairs[2] ~ ethernet.pairs[2]
ethernet_connector.rx_pairs[3] ~ ethernet.pairs[3]

# Connect status LEDs
ethernet.led_speed ~ speed_led_output
ethernet.led_link ~ link_led_output